<assembly.drawing.titleblock />

Add one assembly.drawing.titleblock directly inside an assembly.drawing.page. It renders a fixed title block at the lower right of the sheet, using fields based on ISO 7200.

import { assembly } from "@tscircuit/core"

export default () => (
  <assembly.device name="controller">
    <board name="carrier" width="80mm" height="50mm" thickness="1.6mm">
      <hole name="H1" diameter="3.2mm" pcbX={-35} pcbY={-20} />
      <hole name="H2" diameter="3.2mm" pcbX={35} pcbY={-20} />
      <hole name="H3" diameter="3.2mm" pcbX={35} pcbY={20} />
      <hole name="H4" diameter="3.2mm" pcbX={-35} pcbY={20} />
    </board>
    <assembly.drawing.page name="carrier-inspection" size="iso_a4">
      <assembly.drawing.partview
        partRef=".carrier" name="plan" displayName="PLAN"
        direction="z+" width="110mm" height="85mm"
        centerX="-70mm" centerY="30mm"
      />
      <assembly.drawing.partview
        partRef=".carrier" name="overview" displayName="ISOMETRIC"
        direction="isometric" width="110mm" height="85mm"
        rightOfRef=".plan" centerY="30mm"
      />
      <assembly.drawing.titleblock
        title="CONTROLLER CARRIER - INSPECTION"
        identificationNumber="CTRL-CARRIER-001"
        revisionIndex="A" legalOwner="tscircuit"
        creator="tscircuit" approvalPerson="PRELIMINARY"
        sheetNumber={1} numberOfSheets={2}
      />
    </assembly.drawing.page>
    <assembly.drawing.page name="carrier-section" size="iso_a4">
      <assembly.drawing.partview
        partRef=".carrier" name="section" displayName="SECTION THROUGH H3 AND H4"
        direction="y+" width="220mm" height="65mm" centerY="25mm"
        section={{ axis: "y", offset: "20mm", keepSide: "less", hatchSpacing: "1mm" }}
      />
      <assembly.drawing.titleblock
        title="CONTROLLER CARRIER - MOUNTING HOLE SECTION"
        identificationNumber="CTRL-CARRIER-002" revisionIndex="A"
        legalOwner="tscircuit" creator="tscircuit"
        approvalPerson="PRELIMINARY" sheetNumber={2} numberOfSheets={2}
      />
    </assembly.drawing.page>
  </assembly.device>
)

Carrier inspection drawing with identification number, revision A, owner, creator, and sheet 1 of 1

Properties

Property	Description
`title`	Required drawing title.
`name`	Optional element name.
`identificationNumber`	Drawing or document number.
`revisionIndex`	Revision label, such as `"A"`.
`legalOwner`	Organization that owns the document.
`creator`	Drawing creator.
`approvalPerson`	Approver or a preliminary status label.
`dateOfIssue`	Issue-date text, for example `"2026-10-26"`.
`sheetNumber`	Positive integer for this sheet.
`numberOfSheets`	Positive integer for the document's total sheet count. Must be at least `sheetNumber` when both are supplied.

Only title is required. Omitted metadata is left blank. The title block does not automatically number pages or reserve space for part views: keep the lower-right area clear when placing viewports. The current exporter needs a sheet at least 190 mm wide and 50 mm high for a title block.

Exporting the containing page includes its title block automatically; see tsci export.

Properties​

Properties