<analog.dcsweepsimulation />

<analog.dcsweepsimulation /> repeats DC analysis while varying one independent voltage or current source. Import analog from "tscircuit". Select the source with sweepSource and add probes for the quantities to graph.

import { analog } from "tscircuit"

export default () => (
  <board routingDisabled>
    <voltagesource name="V1" voltage="5V" acMagnitude="1V" schX={-3} />
    <resistor name="R1" resistance="1k" schY={2} />
    <resistor name="R2" resistance="1k" schX={3} />
    <trace from=".V1 > .pin1" to=".R1 > .pin1" />
    <trace from=".R1 > .pin2" to=".R2 > .pin1" />
    <trace from=".R2 > .pin2" to=".V1 > .pin2" />
    <voltageprobe
      name="VOUT"
      connectsTo=".R2 > .pin1"
      referenceTo=".V1 > .pin2"
    />
    <analog.dcsweepsimulation
      name="Supply sweep"
      sweepSource=".V1"
      sweepStart="0V"
      sweepStop="5V"
      sweepStep="0.5V"
      spiceEngine="ngspice"
    />
  </board>
)

Properties

Property	Description
`sweepSource`	Required selector for an independent voltage or current source.
`sweepStart`	Required first source value. Numbers are volts or amperes according to the source.
`sweepStop`	Required last source value.
`sweepStep`	Required nonzero increment directed from `sweepStart` toward `sweepStop`. Use a negative step for a descending sweep.
`name`	Optional experiment name. Use a unique name for each experiment.
`spiceEngine`	Engine to run the analysis, such as `"ngspice"`. Defaults to `"spicey"`; the selected engine must support the analysis.
`spiceOptions`	Solver options: `method` (`"trap"` or `"gear"`), `reltol`, `abstol`, and `vntol`.
`graphIndependentAxes`	Give each probe channel an independent vertical scale.
`children`	An optional `<analog.sweepparameter />` for repeated runs.

Use matching unit strings such as "0V", "5V", and "0.5V" for a voltage source, or "0mA", "10mA", and "1mA" for a current source. To vary a component value instead, use <analog.sweepparameter /> inside an analysis.

Properties​

Properties